BRASS COMPRESSION FITTINGS

BRASS PIPE FITTINGS

About Compression Fitting

Assembly

  • Cut Tube Square and Deburr
  • Slide nut and Sleeve on tube
  • Add Insert if Plastic Tube
  • Shoulder tube in fitting and hand tighten nut onto fitting
  • Wrench tighten past hand
  • (1-1/4 turns) 1/8 to 1/4
  • (2 1/4 turns) 3/8 to 1

Threads

  • ISO Metric MM, PG, BSW, BSP, BSF, BA, NPT, NPTF, UNC, UNF, UNEF etc.
  • Any threads as per custom designs

Material Specification

  • Free Cutting Brass 319 type.
  • BS 249 type

Finish & Coating

  • Natural Brass
  • Nickel Plated
  • Tin Plated or any as required

About Pipe Fitting

Assembly

  • Apply Thread Sealant Compound or Tape.
  • If using Tape, Wind in the direction of the threads.
  • Do not tape first 2 (starting) Threads.
  • Assembly hand tight.
  • Tighten a minimum of 2-1/2 full turns past hand tight.

Advantages

  • Unlimited Reusability
  • Unlimited Connector Combinations

Threads

  • ISO Metric MM, PG, BSW, BSP, BSF, BA, NPT, NPTF, UNC, UNF, UNEF etc.
  • Any threads as per custom designs

Material Specification

  • Free Cutting Brass 319 type.
  • BS 249 type

Finish & Coating

  • Natural Brass
  • Nickel Plated
  • Tin Plated or any as required
error: Content is protected !!