Brass Pipe Fittings

Brass Pipe Fittings

 

Compatible with:

• • Iron pipe
  • Copper pipe
  • Brass pipe
  • Aluminium pipe
  • Bronze pipe

Note: Pipe threads must be sealed using an approved thread sealant.

Assembly Instructions:

• Straight Fitting:
  • Hand-tighten the external thread into the internal thread.
  • Tighten an additional 2 turns with a wrench for up to ½” male pipe thread.
  • For sizes above ½”, tighten 1-1/2 to 2-1/2 turns with a wrench.
• Elbow and Tee Fitting:
  • Hand-tighten the external thread into the internal thread.
  • Tighten an additional 1 to 1-1/2 turns with a wrench.
  • Tighten the fitting clockwise to align with the tubing (never counterclockwise).

Note: To minimise the possibility of a leaking threaded joint after assembling male to female pipe threads, neither end should be backed out (loosened) once the assembly has been made.

Material Specifications:

• Free-cutting IS-319/CZ-121
• CA360 Brass for bar stock fittings
• CA377 Brass for forged fittings
• Lead-free, bronze, and other special copper alloys as per customer specifications.

Threads:

• BSPT, BSP, NPT any special thread as per customer specification.

Pressure:

• Operating pressure up to 1200 PSI

Temperature Range:

• -65° F to + 250°F (-53°C to 121°C)

Advantages:

• Unlimited reusability
• Unlimited connector combinations
• No tube flaring necessary

Typical Applications:

• Grease
• Fuels
• LP and natural gas
• Refrigeration
• Instrumentation
• Hydraulic systems

Finish & Coating:

• Natural brass
• Nickel plated
• Tin plated
• Any special plating as per customer requirements

Standards:

• Conforming to SAE, ASA, and ASME specifications